Sports & Recreational Flooring
Stauf R202
Solvent- and water-free 2-component polyurethane-based adhesive for bonding artificial turf to suitable seam tapes
Special features
Low consumption
Excellent rib stability even at high temperatures
Suitable for lawn heating
Strength development independent of layer thickness
Scope of application: Artificial turf bonding indoors and outdoors
Suitable surface coverings: Artificial turf surfaces
Suitable substrates: Fine chippings or PU rubber granulate planum
Product features: High adhesive strength easy to apply
Consumption per m²: 250-350 g/m
Insertion time: 45 - 60 minutes at 20 °C
Resilience: After 24 - 48 hours
STAUF ACTIVATOR
Solvent-free accelerator for STAUF 2K-PU products to accelerate the curing process indoors and outdoors
Special features
solvent-free
reduces waiting times
easy to process
easy to dose
Consumption per m²
Depending on the desired processing time at low ambient temperatures
STAUF R 105
2-component polyurethane flooring adhesive
Special features: Universally applicable, highly resilient, can be used indoors and outdoors, water resistant, shrink-free, high dimensional accuracy, high final strength, hard glue marks.
Suitable surface coverings: Elastic sports floor coverings for point and area elastic constructions, EPDM/rubber granulate sheets, Rubber coverings in panels or strips, PVC homogeneous/heterogeneous, quartz vinyl tiles, PVC design flooring (LVT), Various indoor sports facility surfaces.
Suitable substrates: Concrete C25 / 30 according to DIN 1045 (non-slip surface), Calcium sulphate (flowing) screeds, Raised floors, Wooden subfloors (parquet, floorboards), STAUF fillers, Metal, Chipboard (P4 to P7), OSB boards (OSB/2 to OSB/4), Stone, ceramics, terrazzo, tiles, Uncoated gypsum fibre boards, cement screeds.
Suitable primers: STAUF VEP 195, STAUF WEP 180.
Suitable fillers: STAUF XP 20, STAUF GS, STAUF GS stand, STAUF GS Basic, STAUF FZ, STAUF XP 10, STAUF RM, STAUF PU, STAUF SSP RAPID.
Suitable underlayment: STAUF insulation underlay, STAUF decoupling plates.
Product features: Age-resistant, moisture resistant, suitable for underfloor heating, hard-elastic bonding, solvent-free, very easy to paint, Suitable for chair castors according to DIN 12529 anhydrous.
Consumption per m²: 400g with spatula serration 1, 600g with spatula serration 2, 1100g with spatula teeth 3.
Insertion time: approx. 50 minutes at 20 °C.
Resilience: after 12 - 24 hours.
STAUF C 140
30 cm, 40 cm or 20 cm wide polyester fleece as a seam tape for bonding artificial turf surfaces
Special features:
PE coating (35 g/m²)
low material thickness
Scope of application:
Artificial turf bonding indoors and outdoors
Main area of ​​application: tennis, golf, landscaping
Suitable surface coverings:
Artificial turf surfaces
Suitable substrates:
Fine chippings or PU rubber granulate planum
Product features:
age-resistant
highly resilient
not sensitive to frost
not absorbent
water resistant
heat and cold resistant
Available container sizes
100m roll
300m roll
TURFCOAT LM (Line Marking)
For sports grounds, TURFCOAT LM offers ready-to-use, premium acrylic line marking paint. In addition to the traditional white hue, there are several exciting color choices.
TURFCOAT 1100 (Top Coat)
The premium finish TURFCOAT 1100 is built on an acrylic emulsion of the highest caliber. available in a variety of color choices that give the sports surface a vibrant touch. The coating is extremely tough and long-lasting for both indoor and outdoor use. To improve footing and control play speed, the topcoat can be combined with fine silica sand.
TURFCOAT RS (Base Coat)
The premium resurfacer base coat TURFCOAT RS was created utilizing specially formulated resin.The coating's pre-dispersed particles have exceptional pore-filling characteristics that aid in leveling out both new and used sports surfaces. The base coat is extremely tough and long-lasting for use both indoors and outdoors. When the base coat is combined with cement, it becomes an excellent mending material for deep depressions as well as surface defects.
RIPOSARE 2050 (Cushion Coat)
The premium quality coating RIPOSARE 2050 was created using specially formulated flexible resins and is ready for usage. The XPERT PRO SOFT sports surface system's superior cushioning surface effect and accurate ball reaction are made possible by the pre-dispersed high grade rubber particles in the coating.
RIPOSARE S 1050 (Cushion Coat)
High-quality, ready-to-use RIPOSARE S 1050 was created utilizing specifically formulated resins. The pre-dispersed rubber particles in the coating give the X-PRO SOFT sports surface technology a strong cushioning surface effect and player comfort.
TURFPRIME AC 120 (Asphalt Primer)
A high-quality creamy copolymer primer called TURFPRIME AC 120 is utilized to improve the bonding power of the TURFCOAT RS base coat with the asphalt surface. In the process of preparing porous substrates, it can also be utilized to enhance worn or degraded surfaces.
TURFPRIME AC 100 (Concrete Primer)
A high-end creamy copolymer primer called TURFPRIME AC 100 is used to improve the bonding power of the TURFCOAT RS base coat with concrete surfaces and rubber mats. When updating aged sports pitches, it can also be used prior to the application of TURFCOAT 1100 topcoats.
TURFFIX 550 (2K POLYURETHANE ADHESIVE)
The XPERT SOFT sports surface system uses TURFFIX 550, a high strength two component polyurethane adhesive, to attach rubber mat to the asphalt or concrete surface. Additionally, it is the best adhesive for bonding seaming tapes between synthetic grass sheets for installations of both indoor and outdoor artificial grass systems.
Let's Discuss
Your Next Project
Head Office
Office# 01(Ground Floor) - Building# 10,
Tariq Bin Ziad St, Al Rakah Al Janubiyah,
Al Khobar - 34227, Saudi Arabia